Sky L4-2.0L Turbo (2008)
1. If installing a new BPMV, install new EBCM O-ring seals (4) to the BPMV (3).
Important: Ensure the brake pressure switch is properly aligned to the BPMV when installing the EBCM. Do not force the components
together.
2. Carefully install the EBCM (2) to the BPMV.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the EBCM bolts (1).
Tighten the bolts to 2.3 N.m (20 lb in).
4. Inspect the BPMV bracket insulators for damage and replace if necessary.
Important: If necessary, a small amount of denatured alcohol can be used as an assembly aid for installing the BPMV mounting pins to
the BPMV bracket.
