Sky L4-2.0L Turbo (2008)
17. Remove the BPMV bolt.
18. Carefully separate the BPMV from the bracket. Do not pry against the accumulator covers on the underside of the BPMV.
19. Remove the EBCM bolts (1).
20. Carefully pull the EBCM (2) from the BPMV (3). Do not pry the components apart.
21. If installing a new BPMV, remove and discard the EBCM O-ring seals (4).
22. If reinstalling the BPMV, clean the sealing surface of the BPMV with denatured alcohol and allow to dry.
Installation Procedure
