Sky L4-2.0L Turbo (2008)
19. Install the vacuum check valve and vacuum sensor assembly to the vacuum brake booster.
20. Connect the brake booster vacuum sensor electrical connector.
21. Connect the brake fluid level indicator switch electrical connector.
22. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic Brake
System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair) .
23. Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration (See: Lighting and Horns/Brake Light Switch/Service
and Repair/Brake Pedal Position Sensor Calibration) .