Sky L4-2.0L Turbo (2008)
9. Connect the EBCM electrical connector (3). Ensure the tabs on the cam lever are securely locked in place.
10. Install the brake master cylinder and brake pipes assembly to the vacuum brake booster.
11. Install the 2 master cylinder brake pipe fittings to the brake modulator assembly.
Tighten the fittings to 20 N.m (15 lb ft).
12. If equipped, connect the clutch master cylinder hose to the brake master cylinder reservoir.
13. Install 2 new brake master cylinder nuts.
Tighten the nuts to 20 N.m (15 lb ft).
14. Position the wiring harness upward and install the wiring harness retainer to the master cylinder mounting stud on the vacuum brake booster.
