Sky L4-2.0L Turbo (2008)
9. Remove the heated oxygen sensor (HO2S) electrical connector clip (2) from the camshaft cover.
10. Remove the positive crankcase ventilation (PCV) fitting bolt from the turbocharger. Reposition the PCV pipe (with fitting) out of the way.
11. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (SKY) (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service
and Repair)Air Inlet Grille Panel Replacement (Solstice) (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair) .
12. Remove the electrical harness attached at the rear of the camshaft cover.
