Sky L4-2.0L Turbo (2008)
Important: Inspect the CMP sensor for damage, replace as necessary.
1. Lubricate the CMP sensor O-ring seal with clean engine oil.
2. Install the CMP sensor.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the CMP sensor bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the engine wiring harness electrical connector (2) to the intake CMP sensor.
5. Install the fuel feed intermediate pipe. Refer to Fuel Feed Intermediate Pipe Replacement (See: Fuel Delivery and Air Induction/Fuel Supply
Line/Service and Repair) .