Sky L4-2.0L Turbo (2008)
1. Install the EVAP line (3) to the clips and close the clips (4 and 7).
2. Install the retaining clip (1) to the lines.
3. Connect the EVAP canister purge line (6) to the EVAP line. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air
Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
4. With the aid of an assistant, install the fuel feed, EVAP, and brake pipe assembly to the vehicle.
5. Install the pipe clips (4) to the floor panel studs.
6. Install the pipe clip (3) to the floor panel tunnel brace stud.
7. Install the pipe clip (2) to the floor panel tunnel brace stud.
8. Install the pipe clip (1) to the underbody side rail.
