Sky L4-2.0L Turbo (2008)
6. Pull the NEW seal by hand over the EN 48266-1 and into the groove in the injector.
7. Remove the EN 48266-1 from the injector tip.
8. From the EN-48266 , install the EN 48266-2 to the injector tip.
6. Pull the NEW seal by hand over the EN 48266-1 and into the groove in the injector.
7. Remove the EN 48266-1 from the injector tip.
8. From the EN-48266 , install the EN 48266-2 to the injector tip.