Sky L4-2.0L Turbo (2008)
Tighten the fitting to 35 N.m (26 lb ft).
5. Install the turbocharger coolant feed pipe bolt (1) at the turbocharger.
Tighten the bolt to 35 N.m (26 lb ft).
6. Install the coolant feed pipe bracket bolt (3) to the cylinder head.
Tighten the bolt to 10 N.m (89 lb in).
7. Install the charge air bypass valve solenoid tube to the turbocharger coolant feed pipe clips (4).
8. Position and install the radiator surge tank hose to the turbocharger coolant feed pipe fitting.
9. Position the radiator surge tank hose clamp (1) at the turbocharger coolant feed pipe fitting.
10. Fill the cooling system. Refer to Cooling System Draining and Filling (GE-47716) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair)Cooling System Draining and Filling (2.4L LE5 Only) Cooling System Draining and Filling (Static Fill-LNF) (See: Engine, Cooling
