Sky L4-2.0L Turbo (2008)
10. Inspect for fuel leaks using the following procedure:
1. Place a sheet of paper towel in between the bottom of the sensor and the top of the generator.
2. Start the vehicle and allow the vehicle to idle for approximately 5 minutes.
3. Shut the vehicle off.
4. Remove the paper towel and inspect the towel for wetting. If wetting is noted repeat steps 1 through 5.
11. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair) .
