saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
Pressure Regulating Solenoid, A/T|Service and Repair|Page 6988 > < Spark Plug|Specifications|Page 6981

Sky L4-2.0L Turbo (2008)

  • Powertrain Management
  • Transmission Control Systems
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Pressure Regulating Solenoid, A/T
  • Component Information
  • Service and Repair

Page 1
background image

Pressure Regulating Solenoid: Service and Repair

Pressure Control Solenoid Valve Replacement

Removal Procedure

1. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement  (See: Transmission and

Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement) .

2. Disconnect the electrical wiring harness connector (2) from the pressure control solenoid (1).

3. Using a small screwdriver or pick, remove the pressure control solenoid retainer from the control valve body.

4. Remove the pressure control solenoid (1) from the control valve body.
5. Remove the O-ring seals (3-4) from the pressure control solenoid (1), ONLY if the O-rings are cut or worn.

Installation Procedure

  • Powertrain Management
  • Transmission Control Systems
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Pressure Regulating Solenoid, A/T
  • Component Information
  • Service and Repair

Pressure Regulating Solenoid, A/T|Service and Repair|Page 6988 > < Spark Plug|Specifications|Page 6981