Sky L4-2.0L Turbo (2008)
10. Place the transmission in the park position by rotating the shift shaft fully counterclockwise.
11. Connect the shift linkage (2) to the transmission.
12. Install the transmission manual shift shaft nut (1).
Tighten the nut to 9 N.m (80 lb in).
13. Install the transmission mount. Refer to Transmission Rear Mount Replacement (See: Transmission Mount/Service and Repair) .
14. Check the transmission fluid level. Refer to Transmission Fluid Check (See: Testing and Inspection/Component Tests and General
Diagnostics/Transmission Fluid Check) .
15. Lower the vehicle.