Sky L4-2.0L Turbo (2008)
6. Remove the clutch hose/pipe assembly (1) from the clutch hose/pipe retainer bracket (2).
7. Remove the transmission from the vehicle. Refer to Transmission Replacement (With Z0K) (See: Manual Transmission/Transaxle/Service and
Repair/Removal and Replacement/Transmission Replacement (With Z0K))Transmission Replacement (Without Z0K) (See: Manual
Transmission/Transaxle/Service and Repair/Removal and Replacement/Transmission Replacement (Without Z0K)) .
8. Remove the clutch hose/pipe assembly retainer clip from the clutch actuator cylinder (1).
9. Disconnect the clutch hose/pipe assembly (2) from the clutch actuator cylinder.
10. Drain the fluid from the hose/pipe assembly into a suitable container.
Installation Procedure
1. Install the clutch hose/pipe assembly retainer clip to the clutch actuator cylinder (1).
Important: Ensure that the clutch hose/pipe locks securely in place.
2. Connect the clutch hose/pipe assembly (2) to the clutch actuator cylinder.
3. Connect the clutch hose (1) to the clutch actuator cylinder and the brake master cylinder reservoir.