Sky L4-2.4L (2007)
1. Position the number 4 bow (4) to the alignment marks on the lower links.
Notice: Refer to Fastener Notice.
2. Install the screws (3) to the number 4 bow.
Tighten the screws to 10 N.m (89 lb in).
3. Reposition the P-clips, retainer straps and cable the number 4 bow.
4. Rivet the P-clips and the retainer straps and cable to the number 4 bow.
5. Install the extrusion to the number 4 bow, pressing into place.
Important: The old adhesive must be removed and follow the manufacture directions for the new adhesive.
6. Reposition the folding top cover retainer strips to the front bow and side edge of the folding top to the side rails.
7. Install the front folding top cover retainer (1). Refer to Folding Top Cover No. 1 Bow Retainer Replacement.
8. Install the left and right side front weatherstrip retainers. Refer to Folding Top Side Front Weatherstrip Retainer Replacement
9. Install the left and right side front weatherstrips. Refer to Folding Top Side Front Weatherstrip Replacement.
10. Inspect the folding top for proper fit and operation. Refer to Folding Top Adjustment.
