saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Body - Convertible Top Won't Stow/Hard To raise|Page 14893 > < Body - Convertible Top Won't Stow/Hard To raise|Page 14887
Page 1
background image

Convertible Top Strut: Customer Interest
Body - Convertible Top Won't Stow/Hard To raise

TECHNICAL

Bulletin No.: 06-08-67-017C

Date: July 24, 2008

Subject: 
Convertible Top Won't Stow/Difficult to Raise/Windnoise/Waterleak (Re-Install or Replace Drive Link)

Models:
2006-2008 Pontiac Solstice
2007-2008 Saturn SKY
2007-2008 Opel GT
2007-2008 Daewoo G2X

Supercede:

This bulletin is being revised to add models and model years. Please discard Corporate Bulletin Numbers 06-08-67-017B (Section 08 - Body and
Accessories).

Condition

Some customers may comment that the convertible top won't stow or it is difficult to raise all the way. They may also comment that there is a
windnoise/waterleak that has developed at the rear of the passenger or drivers window.

Cause # 1

This condition may be caused by a drive link socket being out of adjustment and possibly coming off the convertible top link. Note that the threads inside
of the ball-socket may be damaged from the disengagement from the link.

Cause # 2

The threads on the drive link may be out of specification, causing the ball-socket to disengage from the link. Ensure that the diameter of the link where
the threads meet falls between 5.794 mm (0.228 in) and 5.974 mm (0.235 in) when measured with a vernier caliper.

Correction # 1

Replace the ball-socket with an all-metal ball-socket and adjust the folding top link ball-socket to 4-6 mm (0.157-0.236 in) from the base/shoulder of the
threads, or with no more than four threads showing on the folding top link. Install the washer on the ball stud. Tighten the ball stud nut to 12 N.m (106 lb
in).

Correction # 2

Body - Convertible Top Won't Stow/Hard To raise|Page 14893 > < Body - Convertible Top Won't Stow/Hard To raise|Page 14887