Sky L4-2.4L (2007)
Trim 5 mm (0.20 in) from the leading edge of the cover using a suitable tool. Clean off any rough edges. It is not necessary to follow the curved
shape of the original part.
19. Install the cover using the provided fastener.
20. Cycle the top and verify proper function and latching of the folding top rear latches. If adjustment is necessary, refer to Folding Top Adjustment
and Door Window Adjustment in SI.
21. Verify the operation and travel of both door glass. Make adjustments as required.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table above.
Disclaimer