Sky L4-2.4L (2007)
Valve Spring: Service and Repair
Valve Stem Oil Seal and Valve Spring Replacement
Tools Required
*
J 43649 Valve Spring Compressor
*
J 36017 Valve Guide Seal Remover
*
J 43653 Flywheel Holding Tool
*
J 43655 Sprocket Holding Tool
Removal Procedure
Important: Prevent the crankshaft from rotating clockwise or counter-clockwise before using compressed air in the cylinder. Rotation of the
crankshaft may cause damage to J 43655.
1. If equipped with a manual transmission leave the transmission in first gear with the vehicle on the ground and the parking brake set.
2. If equipped with an automatic transmission, remove the starter.
3. Install J 43653.
4. Remove the camshaft.
5. Remove the camshaft roller followers.
6. Install the front section of the J 43649 to the second camshaft cover bolt hole.