Sky L4-2.4L (2007)
19. Install the fixed timing chain guide and bolts.
Tighten the bolts to 10 N.m (89 lb in).
20. Install the upper timing chain guide and bolts.
Tighten the bolts to 10 N.m (89 lb in).
21. Install a 24 mm wrench onto the hex on the intake camshaft. Using a torque wrench, tighten the camshaft actuator bolt.
Tighten the bolt to 85 N.m (63 lb ft), plus 30 degrees using the J 45059.
22. Install a 24 mm wrench onto the hex on the exhaust camshaft. Using a torque wrench, tighten the camshaft actuator bolt.
Tighten the bolt to 85 N.m (63 lb ft), plus 30 degrees J 45059.
