Sky L4-2.4L (2007)
Variable Valve Timing Solenoid: Service and Repair
Camshaft Position Actuator Solenoid Valve Replacement
Removal Procedure
1. Remove the intake manifold cover.
2. Disconnect the intake (1) or exhaust (2) camshaft position actuator solenoid valve electrical connector, as required.
3. Remove the exhaust (1) camshaft position actuator solenoid valve bolt and valve, as required.
4. Remove the intake (2) camshaft position (CMP) actuator solenoid valve bolt and valve, as required.
5. Inspect the solenoid valve O-ring seals from damage, replace as necessary.
Installation Procedure