Sky L4-2.4L (2007)
* Yazaki has a wedge or arrow shape, similar to that shown.
Delphi Connectors (Micro .64)
Delphi Connectors (Micro.64 Connectors)
Tools Required
J-38125 Terminal Repair Kit
Important: When probing female 0.64 terminals, it is important to use the correct adapter. There have been some revisions to the test adapter
for 0.64 terminals. The proper adapter for 0.64 terminals is the J35616-64B which has a tin terminal and a blue wire between the base and tip.
Failure to use the proper test adapter may result in damage to the terminal being tested and improper diagnosis.
Terminal Removal Procedure
1. Locate the lever lock on the wire dress cover. While pressing the lock, pull the lever over and past the lock.
2. Disconnect the connector from the component.
3. Locate the 2-wire dress cover locking tabs that are opposite the wire end of the connector. Use a small flat-bladed tool to unlock the dress cover.
4. Once the front 2 locks are unlocked, lift the back 2 locks that are on the wire side of the connector.
