Sky L4-2.4L (2007)
Information Bus: Scan Tool Testing and Procedures
Scan Tool Data Definitions
Scan Tool Data Definitions
Accessory Relay Command
-
The scan tool displays the state of the accessory relay command.
Battery Voltage Signal
-
The scan tool displays the vehicle voltage.
Ignition Mode Switch
-
The scan tool displays the ignition switch voltage signal. This signal is derived from the ignition Off/Run/Crank circuit.
Ignition Switch Accessory
-
The scan tool displays the state of the ignition switch accessory circuit.
Ignition Switch Run/Crank
-
The scan tool displays the state of the ignition switch Run/Crank circuit.
Key In Ignition Cylinder
-
The scan tool displays whether or not the key is in the ignition cylinder.
Power Mode
-
The scan tool displays the vehicle power mode.
Run Relay Command
-
The scan tool displays the state of the Run relay.
Run Crank Relay Command
-
The scan tool displays the state of the Run Crank relay.
Scan Tool Data List
Scan Tool Data List
Scan Tool Output Controls
Scan Tool Output Controls
