Sky L4-2.4L (2007)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Chassis
Evaporative Emission Hoses/Pipes Replacement - Chassis
Removal Procedure
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027-100) Fuel Pressure Relief (Without CH 48027-100).
2. Disconnect the evaporative emission (EVAP) pipe (1) quick connect fitting from the purge solenoid.
3. Disconnect the fuel feed pipe (2) from the fuel rail.
4. Cap or plug the fuel feed pipe, fuel rail and EVAP line to in order to system prevent contamination.
5. Remove the fuel feed and evaporative emission (EVAP) pipe clip from the oil level indicator tube bracket.