Sky L4-2.4L (2007)
18. Install the fuel feed and EVAP pipe clip to the oil level indicator tube bracket.
19. Remove the cap or plug from the fuel feed pipe, fuel rail and EVAP line.
20. Connect the fuel feed pipe (2) to the fuel rail.
21. Connect the EVAP pipe (1) to the purge solenoid.
22. Connect the negative battery cable.
23. Inspect for fuel leaks using the following procedure:
1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
