Sky L4-2.4L (2007)
4. With the aid of an assistant, install the fuel feed, EVAP, and brake pipe assembly to the vehicle.
5. Install the pipe clips (4) to the floor panel studs.
6. Install the pipe clip (3) to the floor panel tunnel brace stud.
7. Install the pipe clip (2) to the floor panel tunnel brace stud.
8. Install the pipe clip (1) to the underbody side rail.
9. Install the pipe clip (2) to the floor panel rear reinforcement.
10. Install the pipe clips (1) from the following:
* Floor panel number 4 cross bar
* Rear carrier bracket
* Right hand brace floor panel tunnel
