Sky L4-2.4L (2007)
Ignition Switch Lock Cylinder: Removal and Replacement
Ignition Lock Cylinder Case Replacement
Ignition Lock Cylinder Case Replacement
Removal Procedure
1. Remove the steering wheel. Refer to Steering Wheel Replacement (good cell).
2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
3. Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement.
4. If applicable, disconnect the ignition lock cylinder solenoid harness connector.
5. Disconnect the ignition switch harness connector.
