Sky L4-2.4L (2007)
1. Install the negative battery cable. Route the cable through the engine wiring harness junction block bracket to battery, main side rail, and BEC.
Notice: Refer to Fastener Notice.
2. Install the battery cable clip bolt (3).
Tighten the bolt to 10 N.m (89 lb in).
3. Install the negative battery cable clips (4) to the wheelhouse liner.
4. Install the negative battery cable terminal from the BEC stud.
5. Install the negative battery cable ground nut (1) at the BEC stud.
Tighten the nut to 10 N.m (89 lb in).
6. Position the engine harness ground terminal behind the negative battery cable terminal and position against the cylinder head.
7. Install the negative battery cable ground bolt.
