Sky L4-2.4L (2007)
Notice: Use care when handling the coil springs in order to avoid chipping or scratching the coating. Damage to the coating will result in
premature failure of the coil springs.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the shock module from the vehicle.
4. Install the shock module into the spring compressor J 45400.
5. Mark the upper control arm assembly and insulator for proper installation.
Important: The spring is compressed when the shock absorber moves freely.
6. Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
7. Remove the shock absorber upper retaining nut.
