Sky L4-2.4L (2007)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder Replacement
Removal Procedure
1. Remove the instrument panel left closeout/insulator panel.
2. Remove the clutch master cylinder push rod (1) from the clutch pedal arm integral stud.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
3. Place a shop towel under the clutch master cylinder in order to catch any fluid loss.
4. Disconnect the clutch hose (1) from the clutch master cylinder and position the hose end above the brake master cylinder reservoir in order to
prevent fluid loss.
