SL L4-1.9L DOHC VIN 7 (1992)
Drive Belt: Service and Repair
Fig. 36 Belt Tensioner Arm
Removal
1.
Disconnect battery ground cable.
2.
Using 14 mm or 9/16 inch wrench, depress tensioner arm, Fig. 36.
3.
Remove belt from A/C compressor and idler pulley, then remove belt.
Installation
1.
Route belt over all pulleys, except front cover idler or A/C compressor.
2.
Using 14 mm or 9/16 inch wrench, depress tensioner arm, Fig. 36.
3.
Install belt to idler pulley and A/C compressor.
4.
Tighten idler pulley to specifications.
