SL L4-1.9L DOHC VIN 7 (1992)
Valve Body: Service and Repair
Valve Body Replacement
Removal
Fig. 3 Valve Body To Case Bolt Removal
1.
Disconnect battery terminals. Disconnect ground terminal first.
2.
Remove battery shield, then battery.
3.
Remove battery tray.
4.
Loosen transaxle connector bolt, then disconnect electrical connector.
5.
On models equipped with ABS, remove master cylinder to booster attaching nuts, then lift cylinder slightly to remove valve body cover, then
position cylinder back on booster studs.
6.
On all models, remove valve body cover attaching bolts.
7.
Remove eleven valve body to case bolts as shown in Fig. 3.
Installation
Fig. 4 Valve Body To Case Bolt Location
