SL L4-1.9L DOHC VIN 7 (1992)
7.
Using suitable carburetor cleaner, clean valve body cover gasket surface, then install valve body cover attaching bolts, in sequence, Fig. 7, and
tighten to specifications.
8.
On models equipped with ABS, install master cylinder to booster attaching nuts, then tighten to specifications.
9.
On all models, connector transaxle electrical connector, then tighten connector attaching bolt to specifications.
10.
Install battery tray, then tighten attaching bolts to specifications.
11.
Install battery and battery shield attaching bolts, then tighten to specifications.
12.
Connect battery terminals. Connect positive terminal first to prevent arcing.
