SL L4-1.9L SOHC VIN 8 (1997)
Brake Hose/Line: Service and Repair
Brake Hose Replacement
WARNING: Always use double walled steel brake pipe when replacing brake pipes. The use of any other pipe is not recommended and may
cause brake system failure. Carefully route and retain replacement brake pipes. Always use the correct fasteners and the original location for
replacement brake pipes. Failure to properly route and retain brake pipes may cause damage to the brake pipes and cause brake system
failure.
Master Cylinder With ABS
1. Obtain recommended pipe and fittings of correct size. Outside diameter of pipe is used to specify size. Use 4.75 mm (0.187 in.) brake pipe.
2. Remove brake pipe to be repaired from vehicle.
3. Cut section to be replaced from brake pipe using an appropriate saw. Do not use a tube cutter -to cut the new pipe; the end must be flat and square
