SL L4-1.9L SOHC VIN 8 (1997)
15. Install the two engine mount to midrail bracket nuts first. Next, install the three engine mount to engine front cover nuts. Remove the block of
wood from under the torque strut after the upper mount assembly is installed. Engine Mount-to-Front Cover. Torque to 50 Nm (38 ft. lbs.). Engine
Mount-to-Mid Rail Bracket. Torque to 50 Nm (38 ft. lbs.).
16. Raise vehicle.
17. Install upper wheelhouse panel.
18. Install wheelhouse side splash shield.
19. Install road wheel. Torque to 140 Nm (103 ft. lbs.).
20. Close radiator drain valve and install engine block drain
21. Lower vehicle.
