SL L4-1.9L SOHC VIN 8 (1997)
5. Remove camshaft out of the rear of the cylinder head.
NOTE: The rear camshaft plug hole is oversize to allow for camshaft removal in-vehicle.
INSTALLATION
1. Install camshaft in rear of the cylinder head.
2. Coat a new rear cylinder head plug with Saturn P/N 21485277 (Loctite 242 or equivalent) and install it using a standard bushing driver.
3. Install the timing gears, timing chain, timing chain guides, tensioner, front cover assembly and rocker cover.
4. Install battery and tighten battery hold-down nut and screw.
Torque to 9 Nm (80 inch lbs.).
5. Install the battery cables.
Torque to 17 Nm (151 inch lbs.).
