SL L4-1.9L SOHC VIN 8 (1997)
5. Place a 1 inch x 1 inch x 2 inch long block of wood between the torque strut and cradle.
NOTE: Installation of the wood block prior to upper engine torque axis mount removal allows the mount to be easily installed without lifting or
jacking the powertrain.
6. Remove engine accessory drive belt.
7. Remove front crankshaft vibration damper/pulley assembly. Hold damper with a strap wrench when removing bolt. Puller jaw slots are cast into
the damper/pulley assembly for removal with a small three-jaw puller, if required.
NOTE: The crankshaft vibration damper/pulley bolt head and washer prevents oil leakage from the cavity around the end of crankshaft.
CAUTION: Do not pry against the cover. The accessory drive belt idler pulley must be removed to allow the front cover to be removed and
replaced in the vehicle.
