SL L4-1.9L SOHC VIN 8 (1997)
pointed directly downward at the 6 o'clock position. The pip mark on the crankshaft sprocket must be aligned with the timing mark on the cylinder
block. Excess slack in the chain must be kept to the tensioner side of the cylinder block.
d. Place the timing chain over the camshaft sprocket, and under the crankshaft sprocket. Slide the camshaft sprocket onto the camshaft. The
letters FRT on the camshaft sprocket must face forward away from the cylinder head.
e. Install the camshaft sprocket timing pin (3/16 inch drill).
CAUTION: Do not torque the camshaft retaining bolts against the 3/16 inch timing pins as it will damage the cylinder head.
f.
Install the camshaft washer and bolt. Wrench flats 22 mm (7/8 inch) are located on the cam to hold it.
Torque to 102 Nm (75 ft. lbs.).
