SL L4-1.9L SOHC VIN 8 (1997)
3. Remove accessory drive belt, idler pulley, tensioner assembly, crankshaft damper/pulley, power steering pump, and cam/rocker cover.
IMPORTANT: One front cover assembly attachment bolt is located under the torque axis mount flange, above the accessory drive belt idler
pulley.
NOTICE: Spray the two dowel pin holes in the front cover assembly with penetrating oil to facilitate cover removal off the dowel pins.
4. Remove front cover bolts.
5. Pry cover from front face of cylinder block at upper and lower locations to shear the RTV. A pry bar or large screwdriver can be used.
6. Remove front cover.
