SL L4-1.9L SOHC VIN 8 (1997)
FROM WHICH COMPONENTS ARE BEING REMOVED.
75. Raise vehicle.
CAUTION: Be careful not to push hoses onto heater core so far that foam seal is unseated.
76. Install hose and clamp on heater core outlet. Position clamp at a 7-8 o'clock position.
77. Install hose and clamp on heater core inlet. Position clamp at a 6 o'clock.
78. Lower vehicle.
NOTICE: Use only R-12 Refrigerant oil (mineral) to lubricate O-rings. Use of R-134a (PAG) oil will cause premature corrosion of fitting joints.
79. Remove protective covers. Lubricate with R-12 Refrigerant oil (mineral) and install new O-rings on evaporator pipes.
80. Install Thermal Expansion Valve (TXV) on evaporator.
Torque: 10 N.m (89 ft-lbs)
