SL L4-1.9L SOHC VIN 8 (1997)
3. Remove heater return pipe-to-thermostat housing clamp and hose.
4. Remove clamp and hose from coolant surge tank.
5. Lift pipe and use hacksaw to cut crimp ring on coolant bottle hose.
CAUTION: Cut only deep enough to separate crimp ring. Take care not to cut pipe.
NOTE: When cutting crimp ring, cut at 30 degree angle to centerline of hose.
6. Use a flat head screwdriver to separate ring from hose.
7. Remove hose and ring from pipe.
INSTALLATION
1. Install new clamp on hose.