SL L4-1.9L SOHC VIN 8 (1997)
10. Install midrail bracket.
11. Raise vehicle.
12. Hand start all midrail bracket bolts.
13. Tighten and torque all bolts. Torque to 30 Nm (22 ft. lbs.).
14. Lower vehicle.
CAUTION: To prevent engine front cover and mount damage, the three engine mount to engine front cover nuts must be tightened down
uniformly.
15. Install the two engine mount to midrail bracket nuts first. Next, install the three engine mount to engine front cover nuts. Remove the block of
wood from under the torque strut after the upper mount assembly is installed. Engine Mount-to-Front Cover. Torque to 50 Nm (38 ft. lbs.). Engine
Mount-to-Mid Rail Bracket. Torque to 50 Nm (38 ft. lbs.).
16. Raise vehicle.