SL L4-1.9L SOHC VIN 8 (1997)
5. Disconnect four sunroof drain hoses from sunroof module.
6. Remove fasteners from sunroof module and remove sunroof module.
INSTALLATION
1. Install sunroof module leaving fasteners loose.
2. Connect sunroof actuator (motor) wiring, and connect wiring along right side of sunroof module.
3. Connect map lamp and sunroof switch wiring and install console with two screws.
4. Install sunroof glass assembly. Refer to "Sunroof Glass Assembly Installation" procedure.
5. Align sunroof module by cycling glass open and closed. In the closed position, the glass will center the module.
6. With glass fully open, tighten sunroof module fasteners.
Torque: 14 Nm (124 in-lbs)
