SL L4-1.9L SOHC VIN 8 (1997)
Speedometer Module: Testing and Inspection
SPEEDOMETER
Follow diagnostics on the following pages.
If the speedometer is completely inoperative the internal power supply of the cluster can be checked.
^
Key in the RUN position, engine Off and all of the cluster connectors connected.
^
Measure the voltage between pins J to K of the black 18-way cluster connector. Voltage should be greater than or equal to 7.0 volts.
^
If voltage Ok, proceed with charts on following pages.
^
If the voltage is less than 7.0 volts, refer to the "Instrument Cluster Internal Resistance Checks" to determine which cluster component to
replace.