SL L4-1.9L SOHC VIN 8 (1997)
1. Lock steering wheel in the straight ahead position.
2. Loosen two strut-to-knuckle fasteners and pull or push knuckle in direction of desired change. This will allow up to 1.5 degrees of adjustment.
NOTICE: If more than 1.5 degrees of camber adjustment is required, check for bent suspension components or body structure.
3. If more than 1.5 degrees of camber adjustment is required and no bent components are observed.
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID
PERSONAL INJURY, PROVIDE ADDITIONAL SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS
WILL BE REMOVED FROM.
a. Raise vehicle on hoist.
b. Remove road wheel.
c. Remove two strut-to-knuckle fasteners and separate knuckle from strut bracket.
