SL L4-1.9L SOHC VIN 8 (1997)
4. Install power steering pressure and return hoses.
-
Torque: 27.5 Nm (20 ft. lbs.)
5. Install left side splash shield.
IMPORTANT: Install rear section of shield first. then front
6. Install tabs in body cut-out.
7. Align molded-in shield fasteners with holes in cradle. Push straight in to install.
8. Install push pins.
IMPORTANT: Make sure shield flaps are tucked in at body locations.
IMPORTANT: The rod end threads must be thoroughly cleaned and lubricated before tightening nut. Lubricate only the threaded part of the
