saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Recall - Manual Steering Gear Assembly Fails|Page 8492 > < Recall - Manual Steering Gear Assembly Fails|Page 8490
Page 8
background image

If vehicle fuel tank is not full, the chart may be used to determine amount of weight necessary to be added to the trunk of the vehicle to simulate a full
fuel tank.

^

Adjust tire pressure to correct specifications:

Front - 207 kPa (30 psi)

Rear - 179kPa (26psi)

IMPORTANT

When performing the toe adjustment, the steering wheel must be in the straight-ahead position.

1.

Lock steering wheel in the straight-ahead position.

2.

Loosen left and right inner tie rod-to-outer tie rod jam nuts.

NOTICE

Make sure steering gear boots do not become twisted.

3.

Turn inner tie rods, by the flat on the inner tie rod, in direction of desired toe change.

4.

After adjustment, tighten left and right inner tie rod-to-outer tie rod jam nuts. Torque: 100 N.m (74 ft-lbs)

5.

Check toe angle. Re-adjust if necessary.

Recall - Manual Steering Gear Assembly Fails|Page 8492 > < Recall - Manual Steering Gear Assembly Fails|Page 8490