SL L4-1.9L SOHC VIN 8 (1997)
arson from the knuckle can damage the ring, resulting in loss of ABS operation.
NOTICE: Do not attempt to separate joint using a wedge type tool because the seal may be damaged.
6. Separate ball joint from steering knuckle using SA9132S and remove nut.
7. Remove bolt retaining brake line bracket to inner fender and position brake line to avoid interference.
8. Remove transaxle mount-to-cradle fastener.
9. Place a screw type jack stand under the transaxle casing (use a block of wood between stand and casing) to unload transaxle lower mount.
10. Remove two run-out-to-transaxle fasteners.
11. Loosen and back off on two cradle-to-body bolts. Do not remove bolts.
12. Raise powertrain enough to remove mount and remove mount from vehicle.
13. Lower jack.
14. Remove end cover bolts.
