SL L4-1.9L SOHC VIN 8 (1997)
5. Place a screw-type jack stand under the transaxle casing (use a block of wood between the stand and casing) to unload the transaxle mount.
6. Remove the two transaxle mount-to-transaxle fasteners.
7. Raise the powertrain enough to allow removal of the transaxle mount and remove transaxle mount.
Installation
1. Install the transaxle mount to the transaxle with two fasteners.
-
Torque: 32 Nm (24 ft. lbs.)
2. Lower the powertrain completely.
IMPORTANT: Make sure that the mount stud inserts squarely into the cradle to prevent damaging the threads on the stud.
3. Install a new transaxle mount-to-cradle nut.
-
Torque: 50 Nm (37 ft. lbs.)
