SL L4-1.9L SOHC VIN 8 (1997)
IMPORTANT: Do not pry off cable end with a single screwdriver.
9. Grasp the cable end with long pliers and rotate rod end as shown.
INSTALLATION
1. Connect cables to shifter assembly. When installing shifter cable, use a pair of channel lock pliers to snap cable end socket into ball.
NOTICE: Use care when handling shifter while installing cables. The push rods can be bent and will affect shifting.
2. Install shifter retaining nuts.
-
Torque: 25 N.m (18 ft. lbs.).
3. Install cable retainer plate and install bolt.
IMPORTANT: Install the cable retainer plate with the arrow pointing toward the front of the vehicle.
-
Torque: 10 N.m (88 inch lbs.).