SL L4-1.9L SOHC VIN 8 (1997)
1. Position door trim panel to door structure at attaching hooks. Lock in door trim panel by pushing downward on door trim panel.
2. Install door trim panel fasteners at pull cup and at rear of door trim panel. Close access cover.
3. On manual window vehicles, install manual window regulator handle clip on handle. Install door handle onto vehicle with handle pointed in a
forward and slightly upward position with window closed.
4. Position door handle assembly in trim panel. Tip handle outward at top. Using a thin hook style tool, lift latch and lock rods into trim panel and
slide rearward to engage tabs. Install screw in handle.
Window Regulator/Motor
REAR DOOR WINDOW REGULATOR / MOTOR
REMOVAL
NOTE: Do not damage insulator panel when removing regulator.
1. Remove door trim panel. Outer panel is removed in illustration to show location.
