SL L4-1.9L SOHC VIN 8 (1997)
10. Place wiper module in a vice or on a secured surface. Pry between the frame assembly and the wiper links to free the wiper links from the crank
arm.
11. Remove wiper motor fasteners and remove wiper motor from wiper module.
INSTALLATION
1. Install wiper motor onto wiper module.
Torque: 11 N.m (97 in-lbs)
IMPORTANT: Be certain the new wiper motor crank arm is at the 12 o'clock position just as the old crank arm. If the wiper motor crank arm is not at
12 o'clock position, installation in the cowl will be difficult.
2. Press the transmission links onto the wiper motor crank arm firmly by hand. Assure that the position of the transmission links are not bottomed on
the crank arm ball.
